|
No Nuisance Safety Switch Tripping.
Local residences have been finding there safety switches
tripping for no apparent reason?
All Electrical appliances leak a small amount of
electricity and this becomes a Common problem if you have multiple fridges and
freezers, Dishwashers, Electric pumps such as pool or water pumps, Home offices
with UPS’s Photocopiers, power boards, etc. and the equipment does not need to
be operating just plugged in for your safety switch to nuisance trip.
If you find your safety switch tripping and you go and
reset it and it stays on, and this happens on a regular pattern such as first
thing in the morning, what might be the problem is that your appliances combined
in your house on the affected power circuit, might be leaking a small amount of
electricity which adds up enough, that combined with a ripple on the power lines
caused by Energex switching power substations and heavy industry starting their
equipment (up to 20km away) your safety switch trips.
Unfortunately to test for this problem requires very
expensive equipment and monitoring which only the power line condition
specialist team from Energex can provide or for a more convenient Solution:
Move your electrical equipment to plug into other circuits
to balance leakages.
Or Have your Master Electrician split your circuits and add
extra safety switches.
Or now you can replace your safety switch with a special G
Type Clipsal safety switch which will allow a very short delay of leakage
triggered by a very small surge or spike.
For more information contact Energex or your specialist
Master Electrical Contractor “A U Sparky” on 3200 7111.

|